Showing posts with label Designing with waste. Show all posts
Showing posts with label Designing with waste. Show all posts

03/04/2011

OFF CUT'S





Check this out, some the lads were hacking up a pallet in the workshop to helping me out to build my case for New York. I picked up these little off cuts in the workshop. Great coasters......wonder if it's been done!

20/12/2010

HANGERS

hanger,john green designs
The results of a busy day cutting hangers that have been requested by various people over the last few months, although I have known about these for a while it has been hard to fit them in, I hope the royal mail don't let me down in getting them there on time. I presume they are for christmas presents. Being so responsible for getting the gifts out, is making me feel a bit like an elf!

I've also added a few close-up snaps of the hand screen printed boxes with some low sun on them as seen as though it's christmas :)

05/06/2010

clOck

So here's a blog post on that surprise product as promised! clOck. This is another product that came about as a result of 'designing with waste' in my student days, when I was too tight to scrap even the smallest bits of wood.

The clock comes neatly packed into a standard 12" pizza box, which I painstakingly printed on some textile beds last week (not recommended, it's hard work). If you clikc on the image and zoom in, you should be able to check out the small wages envelopes I utilised for the screw&plug.

I made a limited batch of the clock's and since showing the them at Create10 there are only 2 remaining. The remaining clocks are available through my webshop for a bargain price of £20. CLICK HERE to visit the webshop.

31/05/2010

CREATE10 - Designworks

Above is a quick look at the DesignWorks stand at this years Create10 (as promised). As I feature my work on the blog all the time I thought i'd show you the work of some of the other residents at DesignWorks.
image 1: DesignWorks Stand
image 2: Pantone Wallstore (John Green)
image 3: Light I + Thee Apple (Tom Stanley)
image 4: Clock (John Green)
image 5: DesignWorks Stand
image 6: Grow Frame (Andrew Martin)
image 7: Pantone Wallstore (John Green) 3 Fold (Andrew Martin)

19/05/2010

A SNEAK PEEK


This week is the week of 'create10'. The degree show at York St John University, where I'm still based in my studio within the 'DesignWorks' residents space.

Every year at the show the residents also show some of their latest work. However, because I'm focusing on new products to be launched this September during the LDF, I will not be showing any BRAND NEW products. Instead, I've put a little bit of time into creating a limited edition run of an old design from my student days. I'll keep the product a secret until the show (although it's pretty obvious through the image above). I will also be showing the finished Pantone wallstores (by SELETTI) and Embrace (both now available through various UK retailers).

Here's a sneak peek of the packaging of that secret product! Once the show is underway, I'll will blog the product and make it available through my webshop: http://johngreendesigns.bigcartel.com/

23/12/2009

MERRY CHRISTMAS

Merry Christmas and thanks to everybody who has supported me throughout the year!

08/04/2009

Designing with waste

Designing with waste product no_2. Here's another product that comes from those wasteful center's of the rockingstool. I absolutely LOVE this, it makes me smile everytime, but it seems to have an impact like marmite, some people really don't like this, but others LOVE it.


The letters are CNC cut from 18mm birch faced ply and the clock is made up of 2 sheets of 18mm ply with an acrylic centre. The hands are birch veneer. There are a few these knocking around in the studio, so if you want your very own limited edition you know who to call. This clock looks great even without the letters, minimal.

10/05/2008

designing with waste

Hangers
Today I began to layout the cut sheet for the rockingstool and realised how much waste was about to come. So my immediate reaction was to "design with waste". As I only had about half an hour before my place on the CNC was up I had to quickly create some designs that would fit within the wasted material sections. Not only did I want to save the environment but being a student I couldn't bare to see my own money being wasted. 
The plan was to create a range of everyday user products that have a bit of fun applied to them, I think that I may of been enjoying type today. The hanger is the first of many things to come, as the development for the rockingstool is still underway.
Stay tuned to see some more products to come from "designing with waste".